Book a Visit
Type to search articles or products

Deep Skirting Board: A Renovation Schedule That Actually Works

Deep Skirting Board: A Renovation Schedule That Actually Works

A deep skirting board is not a small finishing detail when you are managing a renovation yourself. It affects plastering, flooring, door casings, radiator pipes, electrical outlets, and the final decorating sequence. Order it too early and it can be damaged by other trades. Order it too late and the flooring installer may be waiting with tools packed away. The reliable approach is to treat the material as a scheduled package, not a last-minute shopping trip. If it's not on the schedule, it's not happening.

Decide what the room needs before ordering

Start with a room-by-room measurement sheet. Record each wall length, door opening, chimney breast, alcove, radiator position, and any section where cabinets will meet the wall. A typical 18-meter room perimeter does not require exactly 18 meters of material. Add at least 10 percent for mitred corners, damaged lengths, awkward cuts, and mistakes. For a room with a 100-millimeter perimeter requirement, that usually means ordering 110 to 112 millimeters of coverage, subject to the supplier's actual profile dimensions.

The phrase deep skirting board can describe several different products. A board might be 18 millimeters thick and 150 millimeters tall, or it might be a slimmer 12-millimeter MDF profile with a much taller face. Confirm both dimensions. Depth affects how far the board projects from the wall and whether it conflicts with architrave, furniture, radiator covers, or a door that opens close to the corner. Height affects visible proportions and whether old paint lines or uneven plaster will remain exposed.

Check the floor build-up before committing. If new engineered wood, tile, or laminate is going over the existing floor, calculate its finished height, including underlay and adhesive where relevant. The board should normally be installed with a controlled gap above the finished floor when the flooring system requires one, rather than being forced tight against a surface that can move. Write the finished floor level on the schedule so the carpenter, flooring installer, and decorator are working from the same reference.

Illustration for deep skirting board

Put the order at the right point in the program

For standard primed MDF, allow roughly one to two weeks for supply if the profile is commonly stocked. Custom heights, moisture-resistant boards, hardwood, or painted finishes can take three to six weeks. That lead time should begin after the profile, length, quantity, and delivery access are confirmed, not when someone first says, "We will need skirting soon."

A workable sequence looks like this:

  1. Finish framing, plaster repairs, and major wall chasing.
  2. Confirm the floor system and mark the anticipated finished level.
  3. Measure again after plaster has dried and major walls are stable.
  4. Order the deep skirting board with a written cutting and delivery plan.
  5. Store it flat, raised off concrete, and protected from direct moisture.
  6. Complete dusty sanding and first-fix corrections before installation.
  7. Fit the boards after flooring preparation but before final decoration.
  8. Fill joints, caulk appropriate gaps, sand, prime cut ends, and apply finish coats.

This sequence prevents a common failure: fitting pristine boards, then having a flooring contractor drag adhesive, boxes, and tools across them. In a Portland renovation, moisture control and acclimatization deserve more attention than they might in a dry Phoenix property. Let timber or engineered products adjust to the indoor environment according to the manufacturer's instructions, and do not store boards against a damp masonry wall.

The trade handoff that prevents rework

The carpenter needs the final profile and finished floor reference. The flooring installer needs to know whether the board is already fitted or will be fitted afterward. The electrician should complete outlet adjustments before the board goes on, especially where low outlets or cable routes sit behind it. The decorator needs access to joints and nail holes before the last coat.

Put these handoffs in writing. A simple schedule entry can say: "Carpenter to fit 150-millimeter boards on Tuesday after floor leveling is accepted; flooring starts Thursday; decorator fills and primes Friday." That is more useful than a general instruction to coordinate trades. If the floor leveling is delayed, move the carpenter rather than allowing a rushed installation over an uncertain base.

Compare material, cost, and repair risk

A deep skirting board made from primed MDF often costs less than hardwood and arrives ready for painting. For a medium room, materials might total $180 to $450, with installation adding approximately $250 to $700 depending on corners, removal, wall condition, and local labor rates. Hardwood can push material costs well above that range, while moisture-resistant MDF is a sensible upgrade near bathrooms, laundry areas, and exterior-facing walls with a history of damp.

MDF is dimensionally consistent and easy to machine, but its cut ends need proper sealing. Hardwood tolerates some knocks and can be stained, yet it costs more and can move with changes in indoor humidity. PVC or polymer profiles can work in utility spaces, although the appearance and fixing method must suit the rest of the house. Do not mix a glossy factory-finished profile with a hand-painted board in the same continuous sightline without checking the transition first.

Also budget for removal. Pulling old boards can reveal loose plaster, hidden cables, pest damage, or a gap that was previously concealed. Allow $75 to $250 for disposal and minor patching in a straightforward room. If the wall is badly uneven, extra adhesive, packers, scribing, or a wider profile may be needed. A cheap board does not produce a cheap result when the installation surface is unstable.

Visual context for deep skirting board

Installation checks before the decorator arrives

Before fitting begins, walk the room with the installer and mark every external corner, internal corner, splice, radiator pipe, and door return. Decide where joints will fall. Keep joins away from the most visible centerline of a wall when possible, and avoid placing a splice beside a doorway where changing light will highlight it.

Check that walls are dry, dust-free, and sufficiently flat. Adhesive alone is not a solution for large hollows. Depending on the wall and product, the installer may use adhesive, pins, screws, or a combination. Fixings should be located with care around known cable and pipe routes. A deep skirting board can conceal services, but it does not make careless drilling safe.

After installation, inspect before painting:

  • Is the top edge consistently aligned from one wall to the next?
  • Are external miters tight, with no visible open wedge?
  • Are nail holes filled and sanded flush?
  • Are cut ends sealed, particularly on MDF?
  • Is the floor gap consistent where the flooring specification requires one?
  • Do doors, furniture, and radiator covers clear the projection?

Photograph completed walls before furniture returns. Those images help identify damage caused by later trades and provide a record for your snagging list.

A short post-mortem from the schedule

The predictable mistake is ordering a deep skirting board from an attractive sample without checking the door lining. A 25-millimeter projection can leave a narrow return at the casing, forcing a visible step or an improvised filler strip. The second mistake is measuring before wall repairs. Even a few millimeters of added plaster across several rooms changes the corner cuts and total quantity.

The fix is a final measure after wet work, a physical sample beside the door trim, and a written delivery date with a two-day buffer. Keep one spare full-length board for future damage; a matching replacement is not guaranteed after a product line changes. This modest storage decision can save a whole-room refit later.

Before closing the task, record who accepts the floor level, who installs the boards, who owns filling and caulking, and when final paint is due. That removes the usual gap where each trade assumes someone else will finish the joints. If it's not on the schedule, it's not happening.

What has caused the biggest skirting delay on your project: late material, uneven walls, flooring changes, or a trade handoff that was never written down?

Ready to talk about your own home?

Book a free site visit — our designer will give you advice based on your actual space.

Book a Free Site Visit
Back to Home

Resident Letters

0 letters

No letters yet — be the first to write one.

Leave a Letter